— That’s not a coating failure. That’s a prep failure — and it happens every day across DFW because crews acid-etch or power-wash instead of grind. Acid etching creates a chemical bond that Texas heat and hot-tire friction eat through over time. It looks fine on install day. It doesn’t look fine 18 months later.

We diamond-grind every floor before a drop of coating touches it. That means HEPA-filtered planetary grinders cutting a mechanical surface profile directly into your concrete slab — a physical bond that heat, tires, and time can’t undo. The coating doesn’t sit on your floor. It fuses to it. We also test for moisture vapor emission before anything goes down, because North Texas clay soil pushes moisture up through slabs in ways that silently destroy systems installed without that step.

It takes longer. It costs more to do it right. And it’s the only reason a Garaginization floor looks the same in year ten as it did on day one. No shortcuts. No exceptions. Every floor. Every time.

— That’s a subcontractor problem. It’s the standard operating model for most DFW garage flooring companies — they sell the job, then hand it off to whoever is available that week. You have no idea who’s walking into your garage, what they’re installing, or whether they’ve been trained to do it right.

Every Garaginization installer is a W2 employee trained in-house by Jon Lee’s team. No subcontractors, no day laborers, no surprises. The same crew standards that have earned an A+ BBB rating for over a decade show up on every job — in Frisco, in Keller, in Plano, and everywhere in between. And because we control the entire process — our crew, our products from suppliers we’ve vetted over 18 years, our installation method — we back every floor with a warranty against defects and wear. When you own the process end to end, a warranty isn’t a risk. It’s a promise you can actually keep.

Jon Lee’s name has been on this location since 2008. That doesn’t survive on luck.

— Most contractors ask you to trust a small laminate chip and a photo on their website. You pick a color from a sample the size of a business card and hope it translates to 400 square feet of real concrete in your actual garage under your actual lighting.

We build a fully rendered 3D model of your specific garage before a single tool comes out. Your dimensions, your layout, your finish choices — rendered so you can see exactly what you’re getting before you say yes to anything. And if you want to see the real materials in person first, our Farmers Branch showroom is the only place in the entire Garaginization network where you can walk in, stand on actual flooring samples, test the hardware, and see every finish option under real light.

You never have to guess. You never have to hope the sample matches the finished floor. You see it, you approve it, and then we build it.

— A smooth, glossy floor looks great in photos. It also becomes a skating rink the first time someone walks in with wet boots, a car drips after a wash, or a DFW storm tracks water across the threshold. This isn’t a rare complaint — it’s one of the most common things we hear from homeowners who had their floors done by someone else.

We integrate anti-slip aggregate into every coating system as a standard step — not an upgrade, not an add-on, not something you have to ask for. The texture is calibrated to be safe underfoot in wet conditions without making the floor harder to clean or rough on bare feet. You get the visual of a polished, finished floor and the safety of a surface that actually grips.

A floor that looks good and sends someone to the ER is not a finished floor. Ours are both.

— Come into our Farmers Branch showroom and we’ll show you exactly what cheap epoxy looks like after a Texas summer. The yellowing. The hot-tire marks. The surface that looked great in the brochure and now embarrasses you every time the garage door goes up. Most contractors can’t show you that comparison because they don’t have a showroom. We’re the only garage flooring company in DFW that does.

We use 100% solids epoxy as the base and 90% solids polyaspartic as the top coat — because that’s the system that actually holds up to DFW heat, UV exposure, and the demands of a working garage. Polyaspartic cures faster, bonds harder, stays UV-stable, and won’t lift when your tires roll in hot off Texas summer asphalt. We’ve tested the alternatives over 18 years of installations across this market. We don’t use them.

You only want to do this once. We’ll tell you exactly what we’re using, exactly why, and show you the proof in person before you spend a dollar.